Hunter pleated shades, individual

Pleated Shades, Individual

To order please select a Hunter model: 26, 260, 27 (89-94), 270, 27_EDGE, 28, 28.5, 280, 29.5, 290, 30 (1989-1993), 306, 31 (83-87), 310, 32 Vision, 320, 326, 33.5, 336, 34, 340, 35.5, 356, 36 Vision, 37.5, 376, 380, 386, 40.5, 410, 42, 420, 426, 43, 430, 450-456, 460-466

Pleated shades were used on Hunters for nearly 25 years and these replacements are made by the original manufacturer. All necessary hardware is included.

To order shades, you\'ll need the dimensions of your existing shades or the fixed fixed ports/windows you wish to cover. If your model isn't available as a complete set, it\'s because we cannot be certain of the shades required. We\'ve learned the hard way that Hunter changed window sizes and configurations without notice. On this screen you can order each shade one at a time.

Measuring: It\'s easy! Don\'t measure the windows, don\'t measure the shades, measure the area you want the shades to cover. See the illustration below for details. Allow some room above and below the shade for the mounting hardware, as well as a little overlap on the sides so you don\'t have gaps. Also, if you have the same window configuration port and starboard, please order them as two separate shades. Otherwise, you might receive a shade with an angled cut on the wrong end!

Color: The original fabric color was discontinued by the fabric mill, but Off-White is quite close to the color of the original shades. But you can use a different color, there are no rules!

Returns: Because these shades are cut to your specifications, they are not returnable unless defective

We're adding more parts daily. Can't find the part you need? Contact us.

Shipping time: see chart

Made to order: No

Please check to make sure the part you're replacing looks like the one in the photo. There may be small differences due to manufacturer upgrades and redesigns.