Serving sailors online since 1997
Hunter OEM Parts
General Marine Parts

Hookit 5" Firm Low Profile Dust Free Backing Pad

Pad #05855

Use with 5-inch diameter Hookit dust free sanding discs.
Note that this older "dust free" hole pattern is different than the "Clean Sanding" hole pattern, which has many more dust extraction holes.
Thin, firm foam and blunt 15 edge for good edge durability allows for aggressive sanding - good for flatter surfaces.
Used for coarse grit disc applications, and where good leveling is needed.
Fits random orbital sanders with 5/16"-24 internal thread.
Heavy on the technical side...
Should you use a soft or firm sanding disc backing pad?
After you have decided between Stikit or Hookit, and chosen no-hole or clean sanding discs, and selected the disc diameter, you will still often be left with the choice of a firm or a soft backing pad.
As a general rule, you should use coarser abrasive discs on firm backing pads, and finer grit discs on soft backing pads.
Soft Backing Pads
The advantage of a soft pad is that its surface can flex to some extent, conforming to the shape of the surface being sanded.
This facilitates higher surface contact, more consistent material removal, and less gouging.
Soft pads are not intended for use with very coarse abrasive discs for heavy duty work, as the higher stresses induced by very coarse abrasives fatigues the foam prematurely.
Having said that, a soft pad can be used with coarse grit discs for heavy material removal on rounded surfaces - like a sailboat hull - where it would be difficult to maintain full surface contact with a stiffer, firm backing pad.
Just don't expect the soft pad to last as long.
Firm Backing Pads
Using coarse discs on a firm backing pad works very well, as long as the work surface is flat.
Using a firm pad on a curved surface can easily result in hard-to-remove gouges and scratch marks.
If the surface isn't flat - again, like a sailboat hull - you will generally want to use a softer pad for full surface contact, no matter what the grit of the sanding disc.
Firm pads are also recommended for leveling uneven surfaces - such as paint brush strokes and runs.
In this application, a soft pad might simply conform to raised areas, rather than cutting them down.
Leaves warehouse: Next business day
(if in stock)

Shipping time: see chart

Made to order: No

zoom image

Current inventory as of Saturday, 12:30 pm Pacific time
Item Our SKU
Mfg P/N
Specs Status Price Quantity
5 in. Hookit Low Profile Firm Dust Free Disc Backing Pad - 5/16-24 Ext. Thread
SKU 167335

Mfg p/n 051131-05855
# Holes: 5
Diameter: 5"
Edge Bevel: 15°
Face Color: Yellow
Foam Color: Yellow
Foam Density: Firm
Hook Type: 1 - Small J Hook
Max. RPM: 12,000 rpm
Thickness: 3/8"
Tool Attachment: 5/16-24 Ext. Thread
Out of Stock$24.63

Positive SSL