Serving sailors online since 1997
Hunter OEM Parts
General Marine Parts

Hookit 8" Soft Disc Pad - 5/8-11 Internal Threads

Pad #05768 Slow Speed Polishers with 5/8" Shaft

Fits all standard (5/8" shaft) slow speed polishers.
Maximum operating speed - 3,000 rpm.
Ideal for use with fine grade abrasives for finish sanding topcoats on contoured or curved surfaces.
A soft, orange foam pad with a very flexible edge - suitable for hulls and other curved surfaces
Appoximate 45 bevel makes for a softer edge, better contact on contoured surfaces, and allows the sanded area to be "featheredged" or more easily blended
Excellent conformability
Hookit pad face holds the disc securely, allowing easy attachment and removal
Sold by the each; 1 per case
Heavy on the technical side...
Should you use a soft or firm sanding disc backing pad?
After you have decided between Stikit or Hookit, and chosen no-hole or clean sanding discs, and selected the disc diameter, you will still often be left with the choice of a firm or a soft backing pad.
As a general rule, you should use coarser abrasive discs on firm backing pads, and finer grit discs on soft backing pads.
Soft Backing Pads
The advantage of a soft pad is that its surface can flex to some extent, conforming to the shape of the surface being sanded.
This facilitates higher surface contact, more consistent material removal, and less gouging.
Soft pads are not intended for use with very coarse abrasive discs for heavy duty work, as the higher stresses induced by very coarse abrasives fatigues the foam prematurely.
Having said that, a soft pad can be used with coarse grit discs for heavy material removal on rounded surfaces - like a sailboat hull - where it would be difficult to maintain full surface contact with a stiffer, firm backing pad.
Just don't expect the soft pad to last as long.
Firm Backing Pads
Using coarse discs on a firm backing pad works very well, as long as the work surface is flat.
Using a firm pad on a curved surface can easily result in hard-to-remove gouges and scratch marks.
If the surface isn't flat - again, like a sailboat hull - you will generally want to use a softer pad for full surface contact, no matter what the grit of the sanding disc.
Firm pads are also recommended for leveling uneven surfaces - such as paint brush strokes and runs.
In this application, a soft pad might simply conform to raised areas, rather than cutting them down.
Leaves warehouse: Next business day
(if in stock)

Shipping time: see chart

Made to order: No

zoom image

Current inventory as of Wednesday, 4:30 am Pacific time
Item Our SKU
Mfg P/N
Specs Status Price Quantity
8 in. Hookit Soft Disc Pad - 5/8-11 Int. Thread
SKU 06061

Mfg p/n 051131-05768
Diameter: 8"
Edge Bevel: 45°
Face Color: Yellow
Foam Color: Orange
Foam Density: Soft
Hook Type: 1 - Small J Hook
Max. RPM: 3,000 rpm
Per Case: 1
Thickness: 1"
Tool Attachment: 5/8-11 Int. Thread
Type: Soft Pad (5/8-11)
Out of Stock$83.22

Positive SSL