Serving sailors online since 1997
Hunter OEM Parts
General Marine Parts

Hookit 6" Firm Low Profile Clean Sanding Disc Pad

Pad #20356 Dual Action & Random Orbital Sanders

This pad features the 3M Clean Sanding hole pattern for truly superior vacuum-assisted dust extraction.
It can, however, be used to back up ANY 6" Hookit abrasive disc (regardless of hole pattern), with or without vacuum.
It fits all standard (5/16-24 thread) sanders.
Thin, firm red foam allows for aggressive sanding - good for flatter surfaces
Appox. 45 tapered edge provides some flexibility
Hookit pad face holds the disc securely, allowing easy attachment and removal
Sold by the each; 10 per case
The Hook Saver for this pad is MMM 20446; see Related Products, below.
Heavy on the technical side...
Should you use a soft or firm sanding disc backing pad?
After you have decided between Stikit or Hookit, and chosen no-hole or clean sanding discs, and selected the disc diameter, you will still often be left with the choice of a firm or a soft backing pad.
As a general rule, you should use coarser abrasive discs on firm backing pads, and finer grit discs on soft backing pads.
Soft Backing Pads
The advantage of a soft pad is that its surface can flex to some extent, conforming to the shape of the surface being sanded.
This facilitates higher surface contact, more consistent material removal, and less gouging.
Soft pads are not intended for use with very coarse abrasive discs for heavy duty work, as the higher stresses induced by very coarse abrasives fatigues the foam prematurely.
Having said that, a soft pad can be used with coarse grit discs for heavy material removal on rounded surfaces - like a sailboat hull - where it would be difficult to maintain full surface contact with a stiffer, firm backing pad.
Just don't expect the soft pad to last as long.
Firm Backing Pads
Using coarse discs on a firm backing pad works very well, as long as the work surface is flat.
Using a firm pad on a curved surface can easily result in hard-to-remove gouges and scratch marks.
If the surface isn't flat - again, like a sailboat hull - you will generally want to use a softer pad for full surface contact, no matter what the grit of the sanding disc.
Firm pads are also recommended for leveling uneven surfaces - such as paint brush strokes and runs.
In this application, a soft pad might simply conform to raised areas, rather than cutting them down.
Leaves warehouse: 1 business days
(if in stock)

Shipping time: see chart

Made to order: No

zoom image

Current inventory as of Sunday, 12:30 pm Pacific time
Item Our SKU
Mfg P/N
Specs Status Price Quantity
6 in. Hookit Low Profile Firm Clean Sanding Disc Pad - 5/16-24 Ext. Thread
SKU 200092

Mfg p/n 051141-20356
# Holes: 52
Diameter: 6"
Edge Bevel: 45°
Face Color: Black
Foam Color: Red
Foam Density: Firm
Hook Type: 2 - Tall J Hook
Max. RPM: 12,000 rpm
Per Case: 10
Thickness: 3/8"
Tool Attachment: 5/16-24 Ext. Thread
3 in stock$37.39

Positive SSL