Serving sailors online since 1997
Hunter OEM Parts
General Marine Parts
 

Scotch-Weld Duo-Pak Structural Adhesive Cartridges

2-Part Adhesives in Convenient Pre-Measured Cartridges

3M is the industry leader in small-volume Duo-Pak adhesives, offering a huge number of choices from general purpose to extremely specialized.
 
Here, we offer a representative selection to illustrate the wide range of strengths, flexibilities, work times, handling times, viscosities, working temperatures, substrate types, and other properties which are available.
 
 
If you don't find an adhesive in our selection to suit your requirements, please inquire at 1-800-426-6930, as many more formulations are available. Ask for 3M Customer Service.
 
 
Duo-Pak Epoxy (100, 200, & 400 series), Urethane (600 series), and Acrylic (800 series) structural adhesives offer an alternative to mechanical fasteners and welds in metals, plastics, and wood.
 
They allow for greater design latitude, cleaner lines, material substitutions, less machining, lighter weight, and increased durability often at a lower cost.
 
As a rule of thumb, 3M Structural Strength Adhesives bond the load-bearing parts of a product with a minimum of 1,000 psi overlap shear strength.
 
 
Duo-Pak adhesives are available in formulations for bonding steel, copper, aluminum, low surface energy (difficult to adhere) plastics, rubber, ceramics, composites, glass, wood, masonry, and more.
 
They can be used to assemble plastic structures, bicycle frames and automotive components, bond golf club heads to shafts, bond and seal radiator coils, assemble furniture and appliances, bond steel to concrete, etc., etc.
 
 
Duo-Pak cartridges are designed for use with specific applicator guns.
 
The majority use the 3M EPX Plus II Applicator gun; see the Specification Table, as well as Related Products, below.
 
 
The following are examples of the range of Duo-Pak adhesives available.
 
Please open the Specification Table to see a complete listing of all the Duo-Paks we sell, as well as the applicator gun to use with each.
 
Times provided are worklife or "gel" times; refer to the Spec Table for more details
 
DP-100 - general purpose, fast setting (5 min) rigid bonds; epoxy
 
DP-110 - general purpose, fast setting (8 min) flexible bonds; epoxy
 
DP-190 - moderately high strength, slow setting (80 min) very flexible bonds; epoxy
 
DP-420NS - very high strength, non-sag, moderate setting (20 min) good high & low temperature strength, toughened epoxy
 
DP-460 - very high strength, slow setting (60 min) good low temperature strength, high impact resistant, toughened epoxy
 
DP-600 - for concrete repair, self-leveling, horizontal crack and spall repair, fast set (1 min), fast cure (1 hr); urethane
 
DP-600NS - for concrete repair, non-sagging, vertical repairs, setting anchors, fast set (1 min), fast cure (1 hr); urethane
 
DP-601 - moderately high strength, self-leveling, very rapid setting (1 min) flexible bonds; urethane
 
DP-620NS - moderately high strength, non-sag, moderate setting (20 min) flexible bonds; urethane
 
DP-810 - moderately high strength, fast setting (10 min) high impact resistant, durable bonds; acrylic
 
DP-8005 - moderately high strength, structural adhesive for hard-to-bond plastics, fast setting (3 min) acrylic
 
DP-8010 - structural adhesive for hard-to-bond plastics, fast setting (10 min) acrylic adhesive
 
 
Note: most urethanes and some acrylics only have a 6-month shelf life, and all acrylic adhesives should be refrigerated.
 
You must purchase the appropriate disposable mixing nozzles separately.
 
 
In the Specification Table:
 
Viscosity is measured in (cP) centipoise (after Jean Poiseuille) [water = 1.0 cP, honey = 1500 cP, molasses = 8600 cP, ketchup = 60,000 cP, warm peanut butter = 150 - 200,000 cP (non-sag)]
 
T-Peel Strength is measured in (piw) lb per inch of width
 
Overlap Shear is measured in (psi) pounds per square inch
 
Note: The technical information and data herein should be considered representative or typical only, and should not be used for specification purposes
Leaves warehouse: Next business day
(if in stock)

Shipping time: see chart

Made to order: No

zoom image
×

Current inventory as of Friday, 8:30 pm Pacific time
Item Our SKU
Mfg P/N
Specs Status Price Quantity
Universal Epoxy Adhesive Duo-Pak - Clear, 50 ml
Image
SKU 13403

Mfg p/n 051135-08107
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 3 min
Approx. Time to Handling Strength @ 75°: 20 min
Approx. Viscosity (cP) @ 75°F: ---
Color: Clear
Composition: Epoxy
Full Cure (72°F): 1 hr
Hardness (Shore D): ---
Key Features: Fast Cure, Flexible Bonds
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: ---
Overlap Shear Strength (psi) @ 180°F: ---
Overlap Shear Strength (psi) @ 75°F: 1100
Peel Strength @ Per Inch of Width: 2 lb
Per Case: 6
Shelf Life: 24 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: Automix
15 in stock$26.60
DP-8005 Duo-Pak Acrylic Adhesive - Translucent, 250 ml, 10:1 Ratio
Image
SKU 137941

Mfg p/n 021200-41548
Applicator Gun: 98073 EPX 200/250/400 ml Manual Applicator Gun
Approx. Mixed Worklife @ 75°: 3 min
Approx. Time to Handling Strength @ 75°: 3 hr
Approx. Viscosity (cP) @ 75°F: 25,000
Color: Translucent
Composition: Acrylic
Full Cure (72°F): 8 - 24 hr
Hardness (Shore D): 60
Key Features: Structural Adhesive for Hard-to-Bond Plastics, Moderately High Strength
Mixing Ratio (Vol. B:A): 10:1
Overlap Shear Strength (psi) @ -67°F: ---
Overlap Shear Strength (psi) @ 180°F: 750/300 (FRP/HDPE)
Overlap Shear Strength (psi) @ 75°F: 2400/1100 (FRP/HDPE)
Peel Strength @ Per Inch of Width: 17 lb
Per Case: 12
Shelf Life: 6 Months @ <40°F (Do Not Freeze)
Size (ml): 250 ml
Size (oz): 8.5 oz
Storage Temperature: 33°F - 40°F Do Not Freeze
Type: DP-8005
23 in stock$162.66
DP-100 Duo-Pak Epoxy Adhesive - 50 ml, Clear, 1:1 Ratio
Image
SKU 209217

Mfg p/n 021200-22648
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 5 min
Approx. Time to Handling Strength @ 75°: 20 min
Approx. Viscosity (cP) @ 75°F: 13,000
Color: Clear
Composition: Epoxy
Full Cure (72°F): 24 - 48 hr
Hardness (Shore D): 80 - 85
Key Features: General Purpose, Rigid Bonds, Fast Setting
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 900
Overlap Shear Strength (psi) @ 180°F: 300
Overlap Shear Strength (psi) @ 75°F: 1500
Peel Strength @ Per Inch of Width: 2 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-100
Out of Stock$21.87
DP-100NS Duo-Pak Epoxy Adhesive - 50 ml, Translucent, 1:1 Ratio
Image
SKU 212212

Mfg p/n 021200-82255
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 5 min
Approx. Time to Handling Strength @ 75°: 20 min
Approx. Viscosity (cP) @ 75°F: 95,000
Color: Translucent
Composition: Epoxy
Full Cure (72°F): 24 - 48 hr
Hardness (Shore D): 87
Key Features: Non-Sag, General Purpose, Rigid Bonds
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 900
Overlap Shear Strength (psi) @ 180°F: 300
Overlap Shear Strength (psi) @ 75°F: 1500
Peel Strength @ Per Inch of Width: 2 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-100NS
Out of Stock$27.98
DP-110 Duo-Pak Epoxy Adhesive - 50 ml, Translucent, 1:1 Ratio
Image
SKU 212213

Mfg p/n 021200-82465
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 8 min
Approx. Time to Handling Strength @ 75°: 20 min
Approx. Viscosity (cP) @ 75°F: 55,000
Color: Translucent
Composition: Epoxy
Full Cure (72°F): 48 hr
Hardness (Shore D): 40
Key Features: General Purpose, Flexible Bonds
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 2700
Overlap Shear Strength (psi) @ 180°F: 250
Overlap Shear Strength (psi) @ 75°F: 3500
Peel Strength @ Per Inch of Width: 20lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-110
12 in stock$28.91
DP-190 Duo-Pak Epoxy Adhesive - 50 ml, Gray, 1:1 Ratio
Image
SKU 212218

Mfg p/n 021200-22647
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 90 min
Approx. Time to Handling Strength @ 75°: 10 hr
Approx. Viscosity (cP) @ 75°F: 80,000
Color: Gray
Composition: Epoxy
Full Cure (72°F): 7 days
Hardness (Shore D): 60
Key Features: Flexible Bonds
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 1500
Overlap Shear Strength (psi) @ 180°F: 400
Overlap Shear Strength (psi) @ 75°F: 2500
Peel Strength @ Per Inch of Width: 20 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-190
Out of Stock$20.10
DP-190 Duo-Pak Epoxy Adhesive - 200 ml, Gray, 1:1 Ratio
Image
SKU 212220

Mfg p/n 021200-87840
Applicator Gun: 98073 EPX 200/250/400 ml Manual Applicator Gun
Approx. Mixed Worklife @ 75°: 90 min
Approx. Time to Handling Strength @ 75°: 10 hr
Approx. Viscosity (cP) @ 75°F: 80,000
Color: Gray
Composition: Epoxy
Full Cure (72°F): 7 days
Hardness (Shore D): 60
Key Features: Moderately High Strength, Flexible Bonds
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 1500
Overlap Shear Strength (psi) @ 180°F: 400
Overlap Shear Strength (psi) @ 75°F: 2500
Peel Strength @ Per Inch of Width: 20 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 200 ml
Size (oz): 6.75 oz
Storage Temperature: 72°F
Type: DP-190
Out of Stock$48.54
DP-620NS Duo-Pak Urethane Adhesive - 50 ml, Black, 1:1 Ratio
Image
SKU 212226

Mfg p/n 021200-96416
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 20 min
Approx. Time to Handling Strength @ 75°: 4 hr
Approx. Viscosity (cP) @ 75°F: Paste
Color: Black
Composition: Polyurethane
Full Cure (72°F): 48 hr
Hardness (Shore D): ---
Key Features: Long Working Time (For a Urethane), Non-Sag, Moderately High Strength, Good Low Temp Flexibility, General Purpose, Bonds Dissimilar Substrates, No Shrinkage, Wide Temp Range
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: ---
Overlap Shear Strength (psi) @ 180°F: ---
Overlap Shear Strength (psi) @ 75°F: 2500
Peel Strength @ Per Inch of Width: ---
Per Case: 12
Shelf Life: 6 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-620NS
Out of Stock$17.00
DP-810 Duo-Pak Low Odor Acrylic Adhesive - 50 ml, Tan, 1:1 Ratio
Image
SKU 212228

Mfg p/n 021200-31310
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 10 min
Approx. Time to Handling Strength @ 75°: 20 min
Approx. Viscosity (cP) @ 75°F: 20,000
Color: Tan
Composition: Acrylic
Full Cure (72°F): 8 - 24 hr
Hardness (Shore D): ---
Key Features: High Strength, High Impact Resistant, Durable Bonds, Low Odor, Minimal Surface Prep
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 1200
Overlap Shear Strength (psi) @ 180°F: 500
Overlap Shear Strength (psi) @ 75°F: 3600
Peel Strength @ Per Inch of Width: 30 lb
Per Case: 12
Shelf Life: 12 Months @ <40°F (Do Not Freeze)
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 33°F - 40°F Do Not Freeze
Type: DP-810
Out of Stock$35.11
DP-810NS Duo-Pak Low Odor Acrylic Adhesive - 50 ml, Clear, 1:1 Ratio
Image
SKU 212229

Mfg p/n 021200-49082
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 10 min
Approx. Time to Handling Strength @ 75°: 20 min
Approx. Viscosity (cP) @ 75°F: 95,000
Color: Clear
Composition: Acrylic
Full Cure (72°F): 8 - 24 hr
Hardness (Shore D): ---
Key Features: Non-Sag, High Strength, High Impact Resistant, Durable Bonds, Low Odor, Minimal Surface Prep
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 1200
Overlap Shear Strength (psi) @ 180°F: 500
Overlap Shear Strength (psi) @ 75°F: 4000
Peel Strength @ Per Inch of Width: 23 lb
Per Case: 12
Shelf Life: 12 Months @ <40°F (Do Not Freeze)
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 33°F - 40°F Do Not Freeze
Type: DP-810NS
Out of Stock$35.11
DP-8010NS Duo-Pak Acrylic Adhesive - 35 ml, Off-White, 10:1 Ratio
Image
SKU 212231

Mfg p/n 021200-96309
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 10 min
Approx. Time to Handling Strength @ 75°: 2 hr
Approx. Viscosity (cP) @ 75°F: 65,000
Color: Off-White
Composition: Acrylic
Full Cure (72°F): 8 - 24 hr
Hardness (Shore D): 60
Key Features: Structural Adhesive for Hard-to-Bond Plastics, Non-Sag, Moderately High Strength; Store @ <40°F
Mixing Ratio (Vol. B:A): 10:1
Overlap Shear Strength (psi) @ -67°F: ---
Overlap Shear Strength (psi) @ 180°F: 450/350 (FRP/HDPE)
Overlap Shear Strength (psi) @ 75°F: 2500/1350 (FRP/HDPE)
Peel Strength @ Per Inch of Width: 30 lb
Per Case: 12
Shelf Life: 6 Months @ <40°F (Do Not Freeze)
Size (ml): 35 ml
Size (oz): 1.18 oz
Storage Temperature: 33°F - 40°F Do Not Freeze
Type: DP-8010NS
Out of Stock$37.53
DP-460 Duo-Pak Epoxy Adhesive - 35 ml, Off-White, 2:1 Ratio
Image
SKU 363015

Mfg p/n 021200-82225
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 60 min
Approx. Time to Handling Strength @ 75°: 4 hr
Approx. Viscosity (cP) @ 75°F: 30,000
Color: Off-White
Composition: Epoxy
Full Cure (72°F): 48 hr
Hardness (Shore D): 75 - 80
Key Features: Very High Strength, Toughened Epoxy, Good Low Temperature Strength, High Impact Resistant, Very High Peel Strength
Mixing Ratio (Vol. B:A): 2:1
Overlap Shear Strength (psi) @ -67°F: 4500
Overlap Shear Strength (psi) @ 180°F: 700
Overlap Shear Strength (psi) @ 75°F: 4500
Peel Strength @ Per Inch of Width: 60 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 37 ml
Size (oz): 1.25 oz
Storage Temperature: 72°F
Type: DP-460
Out of Stock$28.91
DP-420NS Duo-Pak Epoxy Adhesive - 200 ml, Black, 2:1 Ratio
Image
SKU 363784

Mfg p/n 021200-39286
Applicator Gun: 98073 EPX 200/250/400 ml Manual Applicator Gun
Approx. Mixed Worklife @ 75°: 20 min
Approx. Time to Handling Strength @ 75°: 2 hr
Approx. Viscosity (cP) @ 75°F: 180,000
Color: Black
Composition: Epoxy
Full Cure (72°F): 24 hr
Hardness (Shore D): 75 - 80
Key Features: Very High Strength, Non-Sagging, Toughened Epoxy, High Peel Strength
Mixing Ratio (Vol. B:A): 2:1
Overlap Shear Strength (psi) @ -67°F: 4500
Overlap Shear Strength (psi) @ 180°F: 1250
Overlap Shear Strength (psi) @ 75°F: 4500
Peel Strength @ Per Inch of Width: 50 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 200 ml
Size (oz): 6.75 oz
Storage Temperature: 72°F
Type: DP-420NS
Out of Stock$98.18
DP-807 Duo-Pak Acrylic Adhesive - 47 ml, Lt. Yellow, 1:1 Ratio
SKU 431897

Mfg p/n 051115-31635
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 5 min
Approx. Time to Handling Strength @ 75°: 10 min
Approx. Viscosity (cP) @ 75°F: 50,000
Color: Light Yellow
Composition: Acrylic
Full Cure (72°F): 4 - 24 hr
Hardness (Shore D): 79
Key Features: Fast Strength Build-Up, Minimal Surface Prep
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 2000
Overlap Shear Strength (psi) @ 180°F: 825
Overlap Shear Strength (psi) @ 75°F: 4200
Peel Strength @ Per Inch of Width: 20 lb
Per Case: 12
Shelf Life: 12 Months @ <40°F (Do Not Freeze)
Size (ml): 47 ml
Size (oz): 1.59 oz
Storage Temperature: 33°F - 40°F Do Not Freeze
Type: DP-807
Out of Stock$12.93
DP-812 Duo-Pak Acrylic Adhesive - 47 ml, White, 1:1 Ratio
SKU 431899

Mfg p/n 051115-31641
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 10 min
Approx. Time to Handling Strength @ 75°: 20 min
Approx. Viscosity (cP) @ 75°F: 50,000
Color: Light Yellow
Composition: Acrylic
Full Cure (72°F): 4 - 24 hr
Hardness (Shore D): 70
Key Features: Fast Strength Buil-Up, Minimal Surface Prep
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 2100
Overlap Shear Strength (psi) @ 180°F: 975
Overlap Shear Strength (psi) @ 75°F: 4000
Peel Strength @ Per Inch of Width: 35 lb
Per Case: 12
Shelf Life: 12 Months @ <40°F (Do Not Freeze)
Size (ml): 47 ml
Size (oz): 1.59 oz
Storage Temperature: 33°F - 40°F Do Not Freeze
Type: DP-812
Out of Stock$12.34
DP-420NS Duo-Pak Epoxy Adhesive - 37 ml, Black, 2:1 Ratio
SKU 431891

Mfg p/n 021200-39285
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 20 min
Approx. Time to Handling Strength @ 75°: 2 hr
Approx. Viscosity (cP) @ 75°F: 180,000
Color: Black
Composition: Epoxy
Full Cure (72°F): 24 hr
Hardness (Shore D): 75 - 80
Key Features: Very High Strength, Non-Sagging, Toughened Epoxy, High Peel Strength
Mixing Ratio (Vol. B:A): 2:1
Overlap Shear Strength (psi) @ -67°F: 4500
Overlap Shear Strength (psi) @ 180°F: 1250
Overlap Shear Strength (psi) @ 75°F: 4500
Peel Strength @ Per Inch of Width: 50 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 37 ml
Size (oz): 1.25 oz
Storage Temperature: 72°F
Type: DP-420NS
Out of Stock$24.71
DP-420 Duo-Pak Epoxy Adhesive - 37 ml, Black, 2:1 Ratio
SKU 431890

Mfg p/n 021200-41528
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 20 min
Approx. Time to Handling Strength @ 75°: 2 hr
Approx. Viscosity (cP) @ 75°F: 30,000
Color: Black
Composition: Epoxy
Full Cure (72°F): 24 hr
Hardness (Shore D): 75 - 80
Key Features: Very High Strength, Toughened Epoxy, High Impact Resistance, High Peel Strength
Mixing Ratio (Vol. B:A): 2:1
Overlap Shear Strength (psi) @ -67°F: 4500
Overlap Shear Strength (psi) @ 180°F: 570
Overlap Shear Strength (psi) @ 75°F: 4500
Peel Strength @ Per Inch of Width: 50 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 37 ml
Size (oz): 1.25 oz
Storage Temperature: 72°F
Type: DP-420
Out of Stock$25.46
DP-460NS Duo-Pak Epoxy Adhesive - 35 ml, Off-White, 2:1 Ratio
SKU 431892

Mfg p/n 021200-43670
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 60 min
Approx. Time to Handling Strength @ 75°: 4 hr
Approx. Viscosity (cP) @ 75°F: 125,000
Color: Off-White
Composition: Epoxy
Full Cure (72°F): 48 hr
Hardness (Shore D): 78 - 84
Key Features: Very High Strength, Non-Sagging, Toughened Epoxy, Very High Peel Strength
Mixing Ratio (Vol. B:A): 2:1
Overlap Shear Strength (psi) @ -67°F: 4900
Overlap Shear Strength (psi) @ 180°F: 1350
Overlap Shear Strength (psi) @ 75°F: 4650
Peel Strength @ Per Inch of Width: 60 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 37 ml
Size (oz): 1.25 oz
Storage Temperature: 72°F
Type: DP-460NS
Out of Stock$23.99
DP-810 Duo-Pak Low Odor Acrylic Adhesive - 50 ml, Black, 1:1 Ratio
SKU 431898

Mfg p/n 021200-49077
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 10 min
Approx. Time to Handling Strength @ 75°: 20 min
Approx. Viscosity (cP) @ 75°F: 20,000
Color: Black
Composition: Acrylic
Full Cure (72°F): 8 - 24 hr
Hardness (Shore D): ---
Key Features: High Strength, High Impact Resistant, Durable Bonds, Low Odor, Minimal Surface Prep
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 1200
Overlap Shear Strength (psi) @ 180°F: 500
Overlap Shear Strength (psi) @ 75°F: 3600
Peel Strength @ Per Inch of Width: 20 lb
Per Case: 12
Shelf Life: 12 Months @ <40°F (Do Not Freeze)
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 33°F - 40°F Do Not Freeze
Type: DP-810
Out of Stock$22.31
DP-810NS Duo-Pak Low Odor Acrylic Adhesive - 200 ml, Tan, 1:1 Ratio
SKU 431900

Mfg p/n 021200-49084
Applicator Gun: 98073 EPX 200/250/400 ml Manual Applicator Gun
Approx. Mixed Worklife @ 75°: 10 min
Approx. Time to Handling Strength @ 75°: 20 min
Approx. Viscosity (cP) @ 75°F: 95,000
Color: Tan
Composition: Acrylic
Full Cure (72°F): 8 - 24 hr
Hardness (Shore D): ---
Key Features: Non-Sag, High Strength, High Impact Resistant, Durable Bonds, Low Odor
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 1200
Overlap Shear Strength (psi) @ 180°F: 500
Overlap Shear Strength (psi) @ 75°F: 4000
Peel Strength @ Per Inch of Width: 23 lb
Per Case: 12
Shelf Life: 12 Months @ <40°F (Do Not Freeze)
Size (ml): 200 ml
Size (oz): 6.75 oz
Storage Temperature: 33°F - 40°F Do Not Freeze
Type: DP-810NS
Out of Stock$100.04
DP-600 Duo-Pak Urethane Adhesive - 50 ml, Gray, 1:1 Ratio
SKU 431893

Mfg p/n 021200-56602
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 1 min
Approx. Time to Handling Strength @ 75°: 4 min
Approx. Viscosity (cP) @ 75°F: 6,000
Color: Gray
Composition: Polyurethane
Full Cure (72°F): 1 hr
Hardness (Shore D): 70
Key Features: Self-Leveling, Horizontal Concrete, Ceramic, Metal Repair, Rigid Bonds, Fast Cure
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: ---
Overlap Shear Strength (psi) @ 180°F: ---
Overlap Shear Strength (psi) @ 75°F: 2300
Peel Strength @ Per Inch of Width: ---
Per Case: 12
Shelf Life: 6 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-600
Out of Stock$14.19
DP-600NS Duo-Pak Urethane Adhesive - 50 ml, Gray, 1:1 Ratio
SKU 431894

Mfg p/n 021200-56606
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 1 min
Approx. Time to Handling Strength @ 75°: 2 min
Approx. Viscosity (cP) @ 75°F: Paste
Color: Gray
Composition: Polyurethane
Full Cure (72°F): 1 hr
Hardness (Shore D): 70
Key Features: Non-Sagging, Vertical Concrete Repair, Fast Cure
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: ---
Overlap Shear Strength (psi) @ 180°F: ---
Overlap Shear Strength (psi) @ 75°F: 2300
Peel Strength @ Per Inch of Width: ---
Per Case: 12
Shelf Life: 6 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-600NS
Out of Stock$14.19
DP-100FR Duo-Pak Epoxy Adhesive - 50 ml, White, 1:1 Ratio
SKU 431886

Mfg p/n 048011-56742
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 6 min
Approx. Time to Handling Strength @ 75°: 20 min
Approx. Viscosity (cP) @ 75°F: 80,000
Color: Off-White
Composition: Epoxy
Full Cure (72°F): 24 - 48 hr
Hardness (Shore D): 39
Key Features: Flame Retardant; UL94 V-0 Rating, Fast Setting, Rigid Bonds
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 1250
Overlap Shear Strength (psi) @ 180°F: 800
Overlap Shear Strength (psi) @ 75°F: 2200
Peel Strength @ Per Inch of Width: 2 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-100FR
Out of Stock$29.64
DP-420 Duo-Pak Epoxy Adhesive - 37 ml, Off-White, 2:1 Ratio
SKU 431889

Mfg p/n 021200-82236
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 20 min
Approx. Time to Handling Strength @ 75°: 2 hr
Approx. Viscosity (cP) @ 75°F: 30,000
Color: Off-White
Composition: Epoxy
Full Cure (72°F): 24 hr
Hardness (Shore D): 75 - 80
Key Features: Very High Strength, Toughened Epoxy, High Impact Resistance, High Peel Strength
Mixing Ratio (Vol. B:A): 2:1
Overlap Shear Strength (psi) @ -67°F: 4500
Overlap Shear Strength (psi) @ 180°F: 200
Overlap Shear Strength (psi) @ 75°F: 4500
Peel Strength @ Per Inch of Width: 50 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 37 ml
Size (oz): 1.25 oz
Storage Temperature: 72°F
Type: DP-420
Out of Stock$24.12
DP-270 Duo-Pak Epoxy Adhesive - 50 ml, Clear, 1:1 Ratio
SKU 384067

Mfg p/n 021200-82248
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 60 min
Approx. Time to Handling Strength @ 75°: 3 hr
Approx. Viscosity (cP) @ 75°F: 12,000
Color: Clear
Composition: Epoxy
Full Cure (72°F): 48 hr
Hardness (Shore D): 80
Key Features: Rigid Potting Compound; Non-Corrosive to Copper
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 1200
Overlap Shear Strength (psi) @ 180°F: 300
Overlap Shear Strength (psi) @ 75°F: 2500
Peel Strength @ Per Inch of Width: 2 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-270
8 in stock$20.53
DP-605NS Duo-Pak Urethane Adhesive - 50 ml, Off-White, 1:1 Ratio
SKU 431895

Mfg p/n 021200-82252
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 5 min
Approx. Time to Handling Strength @ 75°: 20 min
Approx. Viscosity (cP) @ 75°F: 150,000
Color: Off-White
Composition: Polyurethane
Full Cure (72°F): 48 hr
Hardness (Shore D): 75 - 85
Key Features: Non-Sagging, Semi-Rigid, Good Adhesion to Many Substrates
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: ---
Overlap Shear Strength (psi) @ 180°F: ---
Overlap Shear Strength (psi) @ 75°F: 1250
Peel Strength @ Per Inch of Width: 20 lb
Per Case: 12
Shelf Life: 12 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-605NS
Out of Stock$23.41
DP-105 Duo-Pak Epoxy Adhesive - 50 ml, Clear, 1:1 Ratio
SKU 431887

Mfg p/n 021200-87203
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 5 min
Approx. Time to Handling Strength @ 75°: 20 min
Approx. Viscosity (cP) @ 75°F: 6,500
Color: Clear
Composition: Epoxy
Full Cure (72°F): 48 hr
Hardness (Shore D): 45
Key Features: Very Flexible, Colorless, Moderately High Peel Strength
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 3500
Overlap Shear Strength (psi) @ 180°F: 150
Overlap Shear Strength (psi) @ 75°F: 2000
Peel Strength @ Per Inch of Width: 35 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-105
Out of Stock$26.30
DP-125 Duo-Pak Epoxy Adhesive - 50 ml, Gray, 1:1 Ratio
SKU 431888

Mfg p/n 021200-87215
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 25 min
Approx. Time to Handling Strength @ 75°: 2.5 hr
Approx. Viscosity (cP) @ 75°F: 52,500
Color: Gray
Composition: Epoxy
Full Cure (72°F): 7 days
Hardness (Shore D): 55
Key Features: Very High Strength, Flexible Bonds
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 3400
Overlap Shear Strength (psi) @ 180°F: 400
Overlap Shear Strength (psi) @ 75°F: 4300
Peel Strength @ Per Inch of Width: 35 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-125
Out of Stock$26.30
DP-190 Duo-Pak Epoxy Adhesive - 50 ml, Translucent, 1:1 Ratio
SKU 431914

Mfg p/n 021200-87219
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 80 min
Approx. Time to Handling Strength @ 75°: 6 hr
Approx. Viscosity (cP) @ 75°F: 10,000
Color: Translucent
Composition: Epoxy
Full Cure (72°F): 14 days
Hardness (Shore D): 35
Key Features: Very Good Low Temp Strength, Flexible Bonds
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 3500
Overlap Shear Strength (psi) @ 180°F: 150
Overlap Shear Strength (psi) @ 75°F: 1200
Peel Strength @ Per Inch of Width: 20 lb
Per Case: 12
Shelf Life: 15 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-190
Out of Stock$24.12
DP-190 Duo-Pak Epoxy Adhesive - 400 ml, Gray, 1:1 Ratio
SKU 393763

Mfg p/n 021200-87841
Applicator Gun: 98073 EPX 200/250/400 ml Manual Applicator Gun
Approx. Mixed Worklife @ 75°: 90 min
Approx. Time to Handling Strength @ 75°: 10 hr
Approx. Viscosity (cP) @ 75°F: 80,000
Color: Gray
Composition: Epoxy
Full Cure (72°F): 7 days
Hardness (Shore D): 60
Key Features: Moderately High Strength, Flexible Bonds
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 1500
Overlap Shear Strength (psi) @ 180°F: 400
Overlap Shear Strength (psi) @ 75°F: 2500
Peel Strength @ Per Inch of Width: 20 lb
Per Case: 6
Shelf Life: 15 Months
Size (ml): 400 ml
Size (oz): 13.5 oz
Storage Temperature: 72°F
Type: DP-190
Out of Stock$115.94
DP-820 Duo-Pak Acrylic Adhesive - 47 ml, Yellow, 1:1 Ratio
SKU 431901

Mfg p/n 021200-89347
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 20 min
Approx. Time to Handling Strength @ 75°: 40 min
Approx. Viscosity (cP) @ 75°F: 55,000
Color: Light Yellow
Composition: Acrylic
Full Cure (72°F): 24 - 48 hr
Hardness (Shore D): 79
Key Features: High Strength, 20 Minute Work Life, Minimal Surface Prep
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: 3100
Overlap Shear Strength (psi) @ 180°F: 1900
Overlap Shear Strength (psi) @ 75°F: 3200
Peel Strength @ Per Inch of Width: 35 lb
Per Case: 12
Shelf Life: 6 Months @ 72°F, Longer if Refrigerated
Size (ml): 47 ml
Size (oz): 1.59 oz
Storage Temperature: 33°F - 40°F Do Not Freeze
Type: DP-820
Out of Stock$33.70
DP-8005 Duo-Pak Acrylic Adhesive - 35 ml, Translucent, 10:1 Ratio
Image
SKU 431741

Mfg p/n 051111-92130
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 3 min
Approx. Time to Handling Strength @ 75°: 3 hr
Approx. Viscosity (cP) @ 75°F: 25,000
Color: Translucent
Composition: Acrylic
Full Cure (72°F): 8 - 24 hr
Hardness (Shore D): 60
Key Features: Structural Adhesive for Hard-to-Bond Plastics, Moderately High Strength
Mixing Ratio (Vol. B:A): 10:1
Overlap Shear Strength (psi) @ -67°F: ---
Overlap Shear Strength (psi) @ 180°F: 750/300 (FRP/HDPE)
Overlap Shear Strength (psi) @ 75°F: 2400/1100 (FRP/HDPE)
Peel Strength @ Per Inch of Width: 17 lb
Per Case: 12
Shelf Life: 6 Months @ <40°F (Do Not Freeze)
Size (ml): 35 ml
Size (oz): 1.18 oz
Storage Temperature: 33°F - 40°F Do Not Freeze
Type: DP-8005
Out of Stock$35.11
DP-608 Duo-Pak Urethane Adhesive - 50 ml, Black, 1:1 Ratio
SKU 431896

Mfg p/n 021200-96418
Applicator Gun: All Small EPX Guns
Approx. Mixed Worklife @ 75°: 10 min
Approx. Time to Handling Strength @ 75°: 1.5 hr
Approx. Viscosity (cP) @ 75°F: 270,000 (Paste)
Color: Black
Composition: Polyurethane
Full Cure (72°F): 24 hr
Hardness (Shore D): 60
Key Features: Joins Dissimilar Substrates, Good Low Temp Flexibility, Non-Sagging
Mixing Ratio (Vol. B:A): 1:1
Overlap Shear Strength (psi) @ -67°F: ---
Overlap Shear Strength (psi) @ 180°F: ---
Overlap Shear Strength (psi) @ 75°F: 2000
Peel Strength @ Per Inch of Width: ---
Per Case: 12
Shelf Life: 6 Months
Size (ml): 50 ml
Size (oz): 1.7 oz
Storage Temperature: 72°F
Type: DP-608
Out of Stock$14.29

 
Positive SSL