Low Viscosity "Super Glue"
3M Quick Fix Adhesive is a "super glue" type adhesive providing quick, strong bonds with a variety of substrates.
It has excellent adhesion to most rubber (including weather-stripping and EPDM), vinyl, metals (apinted or bare), glass, and plastics
It also has excellent resistance to temperature extremes, shock, and most marine chemicals and fluids.
General purpose use on a wide range of substrates
Fast rate of strength buildup - does not need support for long during curing
Resists soaps and cleaning agents once cured
Start with clean surfaces
Use as little as possible - only a small amount of adhesive (use small drops; apply 1 drop per square inch)
Apply only to close fitting parts - this type of cyanoacrylate is not a gap filler
Cure starts in 5 - 60 seconds; handling strength is usally quickly achieved; apply tight pressure for the first 15 to 30 seconds
Use it up, or buy a small container - cyanoacrylates typically only have a remaining shelf life of about 30 days after you open the container
Heavy on the technical side...
Directions for use:
Only small drops are needed.
Apply only to close fitting parts - not a gap filler.
Attempting to fill large voids with this adhesive will result in a brittle, weaker bond than is obtained when the product is used correctly.
Surfaces must be clean and dry.
Use 3M General Purpose Adhesive Cleaner (MMM 08984) to remove grease, oil, dust and mold release.
Apply one drop per one square inch.
Mate the second surface to first; rub the two surfaces together to spread the adhesive.
Cure will start within 5 - 60 seconds.
Handling strength is usually obtained within 1-5 minutes
Highest strength within 12 - 24 hours.
Clean up any undesired overflow or squeeze-out quickly, before it sets up.
Store at room temperature.
Unopened shelf life is 12 months.