Serving sailors online since 1997
Hunter OEM Parts
General Marine Parts
 

Stikit 5" Soft Low Profile Finishing Disc Pad

Pad #05545 Stikit Back-Up Pad for Random Orbital Sanders

3M's most popular 5" Stikit Back-Up Pad.
 
Fits all standard (5/16-24 thread) sanders.
 
 
Utilizes a soft foam construction that is ideal for fine grit, topcoat finish sanding.
 
Offers outstanding conformability to contours and curves.
 
 
A soft light yellow foam pad with a very flexible edge - suitable for hulls and other curved surfaces
 
Slightly tapered 15 beveled edge
 
Excellent conformability
 
Brown vinyl pad face provides good disc adhesion, yet allows easy removal
 
Sold by the each; 10 per case
 
 
 
Heavy on the technical side...
 
Should you use a soft or firm sanding disc backing pad?
 
After you have decided between Stikit or Hookit, and chosen no-hole or clean sanding discs, and selected the disc diameter, you will still often be left with the choice of a firm or a soft backing pad.
 
 
As a general rule, you should use coarser abrasive discs on firm backing pads, and finer grit discs on soft backing pads.
 
 
Soft Backing Pads
 
Soft pads are not intended for use with very coarse abrasive discs, as the higher stresses induced by very coarse abrasives fatigues the foam prematurely.
 
Having said that, a soft pad can be used with coarse grit discs for heavy material removal on rounded surfaces - like a sailboat hull - where it would be difficult to maintain full surface contact with a stiffer, firm backing pad.
 
Just don't expect the soft pad to last as long.
 
 
Firm Backing Pads
 
Using coarse discs on a firm backing pad works very well, as long as the work surface is flat.
 
Using a firm pad on a curved surface can easily result in hard-to-remove gouges and scratch marks.
 
If the surface isn't flat - again, like a sailboat hull - you will generally want to use a softer pad for full surface contact, no matter what the grit of the sanding disc.
 
Firm pads are also recommended for leveling uneven surfaces - such as paint brush strokes and runs.
 
In this application, a soft pad might simply conform to raised areas, rather than cutting them down.
Leaves warehouse: Next business day
(if in stock)

Shipping time: see chart

Made to order: No

zoom image
×

Current inventory as of Friday, 4:30 pm Pacific time
Item Our SKU
Mfg P/N
Specs Status Price Quantity
5 in. Stikit Low Profile Soft Finishing Disc Pad - 5/16-24 Ext. Thread
SKU 13636

Mfg p/n 051131-05545
Diameter: 5"
Edge Bevel: 15°
Face Color: Brown
Foam Color: Beige
Foam Density: Soft
Max. RPM: 12,000 rpm
Per Case: 10
Thickness: 11/16"
Tool Attachment: 5/16-24 Ext. Thread
10 in stock$24.69

 
Positive SSL