Serving sailors online since 1997
Hunter OEM Parts
General Marine Parts
 

Stikit 6" Firm Low-Profile Disc Pad

Pad #05556 Back-Up Pad for Random Orbital Sanders

This is 3M's 6" low profile Stikit back-up pad for use in general sanding applications.
 
It fits all standard (5/16-24 thread) sanders.
 
 
Thin, moderately firm foam allows for aggressive sanding - typically good for flatter surfaces
 
Slightly tapered 15 beveled edge provides very good edge support - sands flat
 
Vinyl pad face provides good disc adhesion yet allows easy removal
 
Sold by the each; 10 per case
 
 
 
Heavy on the technical side...
 
Should you use a soft or firm sanding disc backing pad?
 
After you have decided between Stikit or Hookit, and chosen no-hole or clean sanding discs, and selected the disc diameter, you will still often be left with the choice of a firm or a soft backing pad.
 
 
As a general rule, you should use coarser abrasive discs on firm backing pads, and finer grit discs on soft backing pads.
 
 
Soft Backing Pads
 
Soft pads are not intended for use with very coarse abrasive discs, as the higher stresses induced by very coarse abrasives fatigues the foam prematurely.
 
Having said that, a soft pad can be used with coarse grit discs for heavy material removal on rounded surfaces - like a sailboat hull - where it would be difficult to maintain full surface contact with a stiffer, firm backing pad.
 
Just don't expect the soft pad to last as long.
 
 
Firm Backing Pads
 
Using coarse discs on a firm backing pad works very well, as long as the work surface is flat.
 
Using a firm pad on a curved surface can easily result in hard-to-remove gouges and scratch marks.
 
If the surface isn't flat - again, like a sailboat hull - you will generally want to use a softer pad for full surface contact, no matter what the grit of the sanding disc.
 
Firm pads are also recommended for leveling uneven surfaces - such as paint brush strokes and runs.
 
In this application, a soft pad might simply conform to raised areas, rather than cutting them down.
Leaves warehouse: Next business day
(if in stock)

Shipping time: see chart

Made to order: No

zoom image
×

Current inventory as of Friday, 4:30 pm Pacific time
Item Our SKU
Mfg P/N
Specs Status Price Quantity
6 in. Stikit Low-Profile Firm Disc Pad - 5/16-24 Ext. Thread
SKU 196216

Mfg p/n 051131-05556
Diameter: 6"
Edge Bevel: 15°
Face Color: Blue
Foam Color: Yellow
Foam Density: Firm
Max. RPM: 10,000
Per Case: 10
Thickness: 3/8"
Tool Attachment: 5/16-24 Ext. Thread
9 in stock$41.65

 
Positive SSL